If you are ready to do a spring over conversion on a Suzuki Samurai you should consider strengthening the front axle to accommodate the added performance and adventure you will likely subject your Samurai to. Unlike other Suzuki Samurai gusset kits, stiffening only the center of the axle tube and limiting its ability to absorb and deflect, causing the ends to kink without much effort - this one has extra gussets that not only brace the center of the axle but the knuckle ends as well, a weak spot that many have been able to bend on their axles with hard usage. If you look at the picture, there is a small notch in the center of the gusset, this has been made to accommodate for the factory weld on the axle. On this gusset only, there is a hole on top of the unit to accommodate for the factory breather...very genius indeed. Made by Trail Tough. <A href="https://share.acrobat.com/adc/document.do?docid=4211030e-a1c9-453e-843e-f093675b5b3c" target=_blank>VIEW INSTALL INSTRUCTIONS</A>
GUS-500
