Duraline Shrink Tube Replacement (7 Inches)

DuraLine™ Heat Shrink Tubing

Polyethylene heat shrink tubing designed and used to protect the splice on our DuraLine™ ExoShield winch lines. This can also be used to protect cable bundles from abrasion or repair abraded jackets on existing cables. The DuraLine™ Heat Shrink Tubing uses a hot melt adhesive to keep the tubing in place and resists water intrusion.

Note: Requires heat gun to install.

Specifications

• Polyethylene heat shrink tubing
• ID coated with EVA Thermosol hot-melt adhesive
• 3:1 shrink ratio
• ID before shrinking: 1"
• ID after shrinking: .33"
• .030" wall thickness
• Overall Length: 7"
• Black with white DuraLine™ logo
• Same heat-shrink tubing used to protect splice on DuraLine™ ExoShield Winch Lines
• Can also be used to protect cable bundles from abrasion or repair abraded jackets on existing cables
• Hot melt adhesive keeps tubing in place and resists water intrusion
• Requires heat gun to install

Application Data

• Non-vehicle specific